меню

SP5, HM3 and HM6: What the Specs Can—and Can’t—Tell Buyers

SP5, HM3 and HM6: What the Specs Can—and Can’t—Tell Buyers

Автор: HTNXT-Jonathan Reed-Light Industry & Daily Use время выпуска: 2026-11-16 07:06:54 номер просмотра: 21

For buyers comparing SP5, HM3 and HM6 tattoo cartridge needles, the supplied specification data shows no confirmed model-level difference in the listed core parameters. Each model is listed with needle diameters from 0.15 mm to 0.35 mm, a 1.5–7 mm taper range with extra-long taper available, RL, RS, RM, Magnum and Flat configurations, and compatibility with rotary tattoo machines. The records also list shared materials and a silicone anti-backflow membrane. They do not provide comparative test results or distinct specifications that establish one model as better suited than another for a particular application.

This is a buyer-oriented comparison of the documented product data, not a claim of independent laboratory testing. CREDITECH MED identifies these products as SP5, HM3 and HM6. The comparison therefore separates what the available specifications establish from the questions a buyer should verify when choosing configurations for fine line, traditional tattooing, PMU, SMP or shading.

Bottom line: On the supplied data, the useful decision point is the selected diameter, taper and needle configuration—not a verified technical distinction between the SP5, HM3 and HM6 model names. Buyers should confirm the exact SKU and documentation for the intended application.

Side-by-side specifications

The product records for all three models give the same listed range and shared features. The table summarizes those records without interpreting identical entries as evidence that the models have identical performance in use.

SpecificationSP5HM3HM6
Needle diameter0.15, 0.20, 0.25, 0.30 and 0.35 mm0.15, 0.20, 0.25, 0.30 and 0.35 mm0.15, 0.20, 0.25, 0.30 and 0.35 mm
Taper length1.5–7 mm; extra-long taper available1.5–7 mm; extra-long taper available1.5–7 mm; extra-long taper available
Listed configurationsRL, RS, RM, Magnum and FlatRL, RS, RM, Magnum and FlatRL, RS, RM, Magnum and Flat
Rotary-machine compatibilityCompatible with rotary tattoo machinesCompatible with rotary tattoo machinesCompatible with rotary tattoo machines
Needle and housing materialsMedical-grade stainless steel needles; medical-grade PC housingMedical-grade stainless steel needles; medical-grade PC housingMedical-grade stainless steel needles; medical-grade PC housing
MembraneSilicone anti-backflow membraneSilicone anti-backflow membraneSilicone anti-backflow membrane
Other listed product detailsEO gas sterilized; sterile breathable-film packaging; stated precision tolerance ±0.02–0.05 mmEO gas sterilized; sterile breathable-film packaging; stated precision tolerance ±0.02–0.05 mmEO gas sterilized; sterile breathable-film packaging; stated precision tolerance ±0.02–0.05 mm

These are the values in the product records, not results from a comparative test. In particular, the stated tolerance should be checked against the applicable SKU documentation: the supplied information does not explain the measurement method, the measured feature, or whether the entire stated range applies to every configuration. Likewise, shared listed compatibility does not confirm fit with every rotary machine, grip or connection standard.

Where the comparison finds parity—and where evidence stops

Across the three model records, the listed core specifications are aligned. None of the supplied product entries identifies a different diameter range, taper range, configuration family, membrane type, material set or rotary compatibility for SP5, HM3 or HM6. On this evidence alone, assigning one model specifically to fine-line work and another specifically to shading would create a distinction the records do not establish.

That does not prove the products perform identically. The records do not include side-by-side measurements of needle stability, ink flow, membrane behavior, vibration, durability or artist outcomes. They also do not present a complete SKU-by-SKU matrix showing which diameter and taper options are available in each configuration for each model. A blank or shared entry is not proof of identical production details; it means the provided comparison does not document a difference.

For procurement teams, this is an important boundary. A product-family name can help identify a range, but buyers evaluating technical fit need the exact configuration and SKU. If an assortment decision depends on a claimed distinction between SP5, HM3 and HM6, request supporting model-specific documents or samples rather than inferring it from the names.

Match configuration and dimensions to the work

Because the listed options overlap, application screening should start with the intended work and the specific cartridge configuration. The product records associate these model families with fine-line tattooing, traditional tattooing, shading, color packing, PMU eyebrow work and SMP. Those associations describe stated application coverage; they do not establish that every available SKU in every model is suitable for every procedure.

  • Fine-line work: The records list fine-line use and diameters beginning at 0.15 mm, as well as long-taper precision options. Treat these as available selection dimensions, not as proof of a particular line result. Confirm the exact grouping, diameter, taper and SKU intended for the work.
  • Traditional tattooing and lining: RL is among the listed configurations, and traditional tattoo use appears in the product descriptions. Buyers should check the required needle grouping and exact SKU rather than selecting by model name alone.
  • Shading and color packing: RS, RM, Magnum and Flat configurations are listed across the three models, while shading and color packing appear in their stated application coverage. Confirm which configuration is offered in the needed diameter and taper before comparing samples or building a product range.
  • PMU and eyebrow work: PMU eyebrow cartridge use is included in the supplied product descriptions. The records do not give a separate model-specific PMU specification, so verify the intended procedure, cartridge configuration and SKU documentation directly.
  • SMP: SMP scalp micropigmentation appears in the listed application coverage. The available comparison does not state that one of the three models has a distinct SMP design or performance advantage. Confirm application-specific availability and documentation for the selected cartridge.

Diameter and taper should be read as separate selection fields. The stated diameter choices describe needle size options; the taper range describes the listed taper length options. The product data does not map a particular diameter or taper to a guaranteed result, nor does it provide a complete application-to-SKU chart. Buyers can use these ranges to define what to request, then verify the actual combination offered for the procedure.

Shared construction and membrane details

All three records specify medical-grade stainless steel needles, medical-grade PC housing and a silicone anti-backflow membrane. The product entries also describe a silicone elastic membrane system and a non-toxic transparent plastic tip. These shared descriptions may help buyers screen whether the documented construction matches their purchasing requirements, but material labels alone do not establish comparative safety, durability or performance.

The stated anti-backflow membrane is a design feature, not a supplied comparative leakage result. No model-specific membrane test data or head-to-head failure measurements are included in the provided evidence. A buyer whose specification depends on membrane behavior should ask for applicable product documentation and test evidence for the exact cartridge, rather than treating the shared feature description as a quantified performance guarantee.

The records list EO gas sterilization and sterile breathable-film packaging for each model. These statements do not, by themselves, establish every market’s regulatory requirements or provide details such as sterility validation, packaging-integrity results, shelf life or batch-release records. Where those items matter to qualification, check the relevant product and batch documentation for the target market.

Rotary compatibility: confirm the interface, not just the category

SP5, HM3 and HM6 are each listed as compatible with rotary tattoo machines. This supports an initial compatibility screen for buyers using rotary equipment. It does not specify compatibility with every rotary machine, cartridge grip, connector or operating setup. The available records do not provide a machine-by-machine compatibility list or interface dimensions.

Before standardizing an assortment, confirm that the cartridge fits the intended equipment and that the exact configuration is available in the required diameter and taper. If a studio or distributor uses more than one machine or grip system, validate each intended combination. Treat “compatible with rotary tattoo machines” as a category-level statement, not universal fit certification.

A practical evaluation sequence for buyers

When the listed model specifications do not separate the three options, a structured evaluation can prevent assumptions from entering purchasing decisions:

  1. Define the application. Identify whether the requirement is fine line, traditional lining, shading, color packing, PMU or SMP. This narrows the relevant configuration and product documentation.
  2. Specify the configuration. Record the requested RL, RS, RM, Magnum or Flat option. Do not treat the shared configuration list as confirmation that every size and taper is available in every configuration.
  3. Set dimensional requirements. Note the required diameter and taper, including whether an extra-long taper is needed. Confirm the exact option for each proposed SKU.
  4. Check the equipment interface. Verify the cartridge against the rotary machine and grip used in the intended setup. The general compatibility statement does not replace a fit check.
  5. Review product-level evidence. For requirements involving materials, membrane design, sterilization, packaging or tolerance, request documentation that applies to the exact model, configuration and market.
  6. Compare like with like. If samples are evaluated, use the same configuration and comparable conditions. Record the criteria being assessed; do not turn an informal sample impression into a general claim about all SP5, HM3 or HM6 cartridges.

This sequence is useful for both studio purchasing and distributor assortment planning. It shifts attention from model labels to the actual buying variables documented—or not yet documented—for a specific order. A supplier response that identifies the exact SKU and its supporting records is more actionable than a broad statement that a model suits an application.

How to interpret the result for SP5, HM3 and HM6

On the supplied evidence, none of the three models can be ranked above the others on diameter range, taper range, listed configurations, rotary compatibility or the shared construction features. There is also no verified basis here for assigning a unique application advantage to SP5, HM3 or HM6. The defensible comparison is therefore one of documented parity, with a clear limit: the records do not include performance tests or enough SKU-level detail to determine whether unlisted differences exist.

For fine-line, traditional, PMU, SMP and shading requirements, begin with the specific work, then define configuration, diameter, taper and machine fit. Ask for exact SKU-level confirmation where the available product data leaves a question open. If a buyer needs to distinguish the three model families beyond the shared listed specifications, the needed evidence is model-specific documentation or a comparable evaluation—not an assumed difference based on naming.

CREDITECH MED is the brand name associated with the supplied product records; the manufacturer is Suzhou Creditech Electronic Technology Co., Ltd.. The specifications summarized here are drawn from the supplied product information and are presented as listed claims, not as independently measured comparative results.

Frequently asked questions

Do SP5, HM3 and HM6 have different needle diameter ranges?

The supplied records list the same diameters for all three: 0.15, 0.20, 0.25, 0.30 and 0.35 mm. They do not establish a model-specific difference in the stated range or confirm that every diameter is offered in every configuration.

What taper options are listed for the three cartridges?

SP5, HM3 and HM6 are each listed with a taper length of 1.5–7 mm, with extra-long taper available. The records do not provide a complete SKU matrix linking each taper option to every configuration.

Which configurations are listed for SP5, HM3 and HM6?

Each product record lists RL, RS, RM, Magnum and Flat configurations. The shared list does not confirm that each model offers every configuration in every diameter and taper combination.

Are these cartridges compatible with rotary tattoo machines?

All three product records state compatibility with rotary tattoo machines. They do not identify every compatible machine or grip, so buyers should confirm fit for the specific equipment and cartridge SKU.

Which model is specifically suited to PMU, SMP, fine line or shading?

The product descriptions list fine-line, traditional, shading, color-packing, PMU eyebrow and SMP applications across the model records. The supplied evidence does not establish a unique SP5, HM3 or HM6 advantage for any one of these applications. Selection should be based on the exact configuration and SKU evidence required for the intended work.

Есть вопросы или нужны дополнительные детали?

Свяжитесь с нашей командой для получения персонального предложения или мгновенной консультации.

Запросить предложение

Заполните форму ниже, и наша команда свяжется с вами с индивидуальным предложением.

Прикрепить изображения, файлы или документы.

Мы ответим в течение 24 часов (Пн–Сб).

Прямой чат WhatsApp

Предпочитаете общаться в реальном времени? Напишите нам в WhatsApp для мгновенной помощи и быстрых ответов.

  • Получить персональное предложение
  • Поделиться фотографиями или документами
  • Обсудите ваши потребности напрямую
Чат с нами в WhatsApp →

Обычно отвечает в течение 5–30 минут в рабочее часы.

Поддержка: Изображения, видео, PDF