The CFAD102 is a 0.50mm pitch FPC/FFC wire-to-board connector built for compact, high-density board layouts. Phosphor bronze contacts and an LCP or Nylon insulator support a 0.50A current rating at 50V AC/DC, while contact resistance is held to 30mΩ maximum. A secure locking mechanism keeps the mated interface stable in space-constrained assemblies. The connector operates from -25ºC to +85ºC and is used in consumer electronics, automotive electronics, industrial automation, and robotics and drone platforms.
Key Features
0.50mm Pitch Miniaturized Design
A fine 0.50mm contact pitch places more circuits in a smaller footprint, supporting high-density contact capability on compact PCBs.
Secure Locking Mechanism
The locking design retains the mated connection, helping maintain contact continuity where assemblies are subject to movement.
Low Contact Resistance
Contact resistance of 30mΩ maximum supports stable signal and power transfer across the mated interface.
Strong Electrical Isolation
Insulation resistance of 500MΩ minimum and a 500V dielectric withstanding voltage rating support circuit-to-circuit isolation.
Wide Operating Temperature
Rated from -25ºC to +85ºC for use across common consumer, automotive, and industrial operating environments.
Flexible Mounting Options
The insulator can be specified as LCP or Nylon to match the mechanical and processing needs of the assembly.
Technical Specifications
Model
CFAD102
Connector Type
FPC/FFC wire-to-board connector
Pitch
0.50mm
Current Rating
0.50A
Rated Voltage
50V AC/DC
Contact Resistance
30mΩ Max.
Insulation Resistance
500MΩ Min.
Dielectric Withstanding Voltage
500V
Operating Temperature
-25ºC to +85ºC
Contact Material
Phosphor Bronze
Insulation Material
LCP or Nylon
Models and Options
The CFAD102 is supplied as a 0.50mm pitch FPC/FFC wire-to-board connector. Two insulator options are available, LCP or Nylon, and phosphor bronze contacts are used in both configurations. Buyers can select the insulator that best matches their assembly process and mechanical requirements, and flexible mounting options are part of the platform design. Contact Greenconn sales with configuration questions.
Materials and Structure
Contacts are made from phosphor bronze, a copper alloy used for the conductive elements of the connector. The insulator housing is produced in LCP or Nylon. The connector body combines a fine 0.50mm contact pitch with a secure locking mechanism, so the wire-to-board interface is both space efficient and mechanically retained. Greenconn's in-house capabilities cover precision stamping, plating, injection molding, and automated assembly, which supports consistent contact and housing production.
Applications
The CFAD102 is used where compact boards need dependable wire-to-board interconnection:
Consumer electronics – compact power and signal transmission in portable and smart devices.
Automotive electronics – power and signal interconnection for vehicle electronic modules.
Industrial automation – control and instrumentation boards requiring stable mating retention.
Robotics and drones – dense, lightweight interconnect where space and weight are constrained.
These are the application industries stated for this connector. The 0.50A / 50V rating and the -25ºC to +85ºC range should be checked against each design's actual electrical and thermal load.
Customization
Greenconn supports application-specific connector development in addition to standard products. Development covers product design, prototyping, validation, and mass production, supported by a 69-engineer R&D team. Where a project needs a different contact arrangement, insulator option, or mounting configuration, the engineering team reviews the electrical, mechanical, and environmental requirements. Share your drawing or specification with Greenconn sales to start an evaluation.
Frequently Asked Questions
What is the pitch of the CFAD102 connector?
The CFAD102 uses a 0.50mm pitch, which supports high-density contact layouts on compact boards.
What current and voltage does it handle?
The connector is rated for 0.50A at 50V AC/DC.
Which materials are used?
Contacts are phosphor bronze and the insulator is LCP or Nylon.
What is the operating temperature range?
The rated operating temperature range is -25ºC to +85ºC.
What are the insulation resistance and dielectric withstanding voltage?
Insulation resistance is 500MΩ minimum and dielectric withstanding voltage is 500V.
In which industries is this connector used?
Consumer electronics, automotive electronics, industrial automation, and robotics and drones.
Does Greenconn offer customized connector solutions?
Greenconn Technology (Shenzhen) Co., Ltd was founded in 1998 and operates four manufacturing facilities in China and Vietnam, with business locations in Taipei, Osaka, Houston, and Munich.
fpc-ffc-connector-cfad102-locking-mechanism-detail.jpg – Alt: Locking mechanism detail on the CFAD102 FFC wire-to-board connector
wire-to-board-connector-cfad102-board-mounting.jpg – Alt: CFAD102 connector seated on a compact circuit board
SEO Title: 0.50mm Pitch FPC Wire-to-Board Connector | Greenconn CFAD102
Meta Description: CFAD102 FPC/FFC wire-to-board connector with 0.50mm pitch, 0.50A rating, phosphor bronze contacts and secure locking. Request samples for your design.
