меню

120L Metering Bin Vibrating Loss-In-Weight Feeder 159mm Chute

в наличии:
SKU: 6910993756
модель: TG-LW-SV100,TG-LW-SV130,TG-LW-SV160

{{ variable.name }}

{{ value.name }}

Home / Loss-In-Weight Feeders / vibrating-loss-in-weight-feeder-120l-bin

Vibrating loss-in-weight feeder in 120 L bin configuration with 159 mm discharge chute
120 L bin / Φ159 mm chute

120L Metering Bin Vibrating Loss-In-Weight Feeder 159mm Chute

The larger TG-LW-SV build: a 120 L metering bin and Φ159 mm vibrating discharge chute, weighed by two FSSB-100 kg sensors with an HD-ZL150 linear vibrator.

Product Summary

This configuration of the TG-LW-SV uses the 120 L metering bin with the Φ159 mm vibrating discharge chute. Material is released by vibration, weighed by two FSSB-100 kg high-precision sensors and corrected in real time, so the feeder holds a gravimetric set point instead of a volumetric one.

The larger bin gives a longer working inventory before refilling, which suits lines that run long campaigns between material changes. Contact parts are SS304 and the hopper support is Q235-A, painted RAL 5003. Continuous loss-in-weight metering and intermittent loss-in-weight batch metering are both available, and the unit is used with glass fibre, carbon fibre, crushed material and highly abrasive materials.

Key Features

120 L Working Inventory

A 120 L metering bin extends the interval between refills on long production campaigns, with a 5 L collecting hopper below.

Φ159 mm Discharge Chute

The wider vibrating discharge chute option is driven by the HD-ZL150 linear vibrator; the regulating port above it is Φ168 mm.

Dual Sensor Weighing

Two FSSB-100 kg high-precision sensors carry the bin so the feed rate tracks real mass loss.

Difficult Material Duty

Used for glass fibre, carbon fibre, crushed material and highly abrasive materials where volumetric feeding drifts.

Two Production Modes

Continuous loss-in-weight metering or intermittent loss-in-weight batch metering from the same feeder.

Monitoring Ready

A cloud management platform can be matched for remote monitoring of feed rate, weight data, equipment status and alarms.

Technical Specifications

ParameterValue
Model seriesTG-LW-SV100 / TG-LW-SV130 / TG-LW-SV160
Metering bin120 L (80 L option available)
Collecting hopper5 L
Hopper supportQ235-A
Discharge chute regulating portΦ168 mm
High precision sensorFSSB-100 kg x 2
Linear vibratorHD-ZL150
Vibrating discharge chuteΦ159 mm (Φ102 mm option available)
Material-contact partsSS304
Environment temperature0-40 °C
Material temperature0-50 °C
Paint colourRAL 5003

Standard parameters are shown. Additional loss-in-weight feeder configurations can be specified according to the material characteristics and process requirements.

Models and Options

The feeder series comprises TG-LW-SV100, TG-LW-SV130 and TG-LW-SV160. Two metering bin volumes (80 L and 120 L) and two vibrating discharge chute diameters (Φ102 mm and Φ159 mm) are listed; this page covers the 120 L bin with the Φ159 mm chute. An optional electrical explosion-proof function and RAL 5003 paint complete the standard offer.

Materials and Structure

All material-contact parts are SS304, including the 120 L metering bin and the Φ159 mm discharge chute. The hopper support is built from Q235-A and painted RAL 5003. The bin is carried on two FSSB-100 kg sensors, the HD-ZL150 linear vibrator drives the chute, and a 5 L collecting hopper is mounted below the discharge path.

Applications

Compounding plastics, chemicals, building materials, food, new energy and medical production. Frequent duties are automatic food batching, colour-masterbatch and modified-plastics ingredient metering, continuous feeding in extrusion, and ratio control with continuous conveying in chemical and building-material processes.

Loss-in-weight feeder with 120 L bin installed in a continuous production line

Typical line position for a high-inventory metering duty

Customization

Parameters listed here are standard. Configurations beyond them are specified against material characteristics and process requirements, and special requirements are handled through customised design with fast response. The optional electrical explosion-proof function and the cloud management platform are quoted per project.

Case Study

Over one year, 200 units were supplied to compounding plastics, food and chemical producers on the global market. Applications included automatic food batching, colour-masterbatch and modified-plastics metering, continuous feeding in extrusion, and ratio control in chemical and building-material processes. The reported outcome was automated batching, more stable formula control and improved production efficiency.

FAQ

When should I specify the 120 L bin rather than the 80 L?

The 120 L bin holds a larger working inventory, so refills are less frequent on long runs. The choice is confirmed against the material characteristics and process requirements of your line.

Which discharge chute size do I get?

Both Φ102 mm and Φ159 mm are listed. This page covers the Φ159 mm version; the regulating port above the chute is Φ168 mm in both cases.

What creates the weighing signal?

Two FSSB-100 kg high-precision sensors support the metering bin, so the control loop works from mass loss over time.

Are continuous and batch duty both possible?

Yes, continuous loss-in-weight metering and intermittent loss-in-weight batch metering are both supported.

Does it handle abrasive or fibrous material?

The feeder is used with glass fibre, carbon fibre, crushed material and highly abrasive materials, all in contact with SS304 surfaces.

What are the temperature limits?

Standard environment temperature 0-40 °C, material temperature 0-50 °C.

How is certification handled?

The factory is certified to ISO 9001 (38524UQN0DP2R0S) and ISO 14001 (38524UE640TRR0S) for loss-in-weight feeder design, manufacturing and sales. A CE Verification of Conformity (ICR/VC/HFG260828) covers the solid loss-in-weight feeder range; we confirm the model scope for your configuration on request.

Inquiry Information

Tell us your material, bulk behaviour and required feed range and we will confirm the bin and chute combination. Transcell Intelligent Machinery (Changzhou) Co., Ltd., Building 9, No.9 Caoxi Road, Niutang Town, Wujin District, Changzhou City, Jiangsu Province, China.

E-mail: info@transcellgroup.com · Tel: +86 400-068-3777 · WhatsApp: +852 6952 8737 · Website: www.transcellgroup.com

Image Filename and Alt Suggestions

vibrating-loss-in-weight-feeder-tg-lw-sv130-120l-bin-front.png — Alt: 120 L metering bin version of the vibrating loss-in-weight feeder

vibrating-loss-in-weight-feeder-tg-lw-sv130-phi159-chute.png — Alt: Φ159 mm vibrating discharge chute with HD-ZL150 vibrator fitted

vibrating-loss-in-weight-feeder-tg-lw-sv130-hopper-detail.png — Alt: 5 L collecting hopper and Q235-A support frame detail

vibrating-loss-in-weight-feeder-tg-lw-sv130-line-installation.png — Alt: Feeder with 120 L bin installed above an extrusion feed throat