меню

14m 4x2 Truck-Mounted Aerial Platform Truck with 360° Slew

в наличии:
SKU: 8686884261
модель: Aerial Platform Truck

{{ variable.name }}

{{ value.name }}
Product Listing Title14m 4x2 Truck-Mounted Aerial Platform Truck with 360° Slew
SEO Title14m 4x2 Truck-Mounted Aerial Platform Truck with 360 Degree Slew
Meta DescriptionExplore the 14m 4x2 truck-mounted aerial platform truck with 7.5m working radius, 200kg basket, 360-degree slew and dual controls for utility and municipal work.
URL Slugaerial-platform-truck-14m-4x2-360-slew

14m 4x2 Truck-Mounted Aerial Platform Truck with 360° Slew

The quoted 4x2 aerial platform truck reaches 14 m working height with a 7.5 m working radius. It carries 200 kg for two persons and tools, provides 360 degrees continuous slew, and covers street lighting, overhead cabling, signage, facade repair and tree work.

ELORRY 14m truck-mounted aerial platform truck with telescopic boom
Quoted 4x2 truck-mounted aerial platform with the boom and basket stowed for road travel.
ELORRY aerial platform truck side view with outriggers
Chassis and outrigger layout on the 4x2 aerial platform truck.
Basket and boom detail on the Elorry aerial platform truck
Basket and boom area on the truck-mounted aerial platform.

Product Summary

The truck-mounted aerial work platform places the boom turntable and basket behind the cab on a 4x2 chassis. The 14 m working height and 7.5 m working radius cover utility and municipal jobs without moving to a heavier truck. Four hydraulic H-type outriggers spread wider than the chassis, and the boom is operated only after the outriggers are set and the unit is level.

Dual control boxes are fitted at the ground station and in the basket, each with emergency stop and basket priority. A manual pump provides emergency descent if the engine or hydraulics stop, and an anti-drop safety system protects the 360 degree rotation.

Key Features

  • 14 m working height and 7.5 m working radius: one truck position covers street lighting, overhead cabling and signage jobs that would otherwise need several setups.
  • 200 kg basket for two persons: the optional 1,000 kg lifting hook is quoted separately, so basket load and sling load are not mixed.
  • 360 degrees continuous slew with anti-drop protection: the basket is positioned by turning the turntable instead of reversing the truck.
  • Four H-type outriggers with 640 mm front and 180 mm rear protraction: individual ground-station control and load-holding valves support setup on asphalt, paving and soft ground.
  • Dual controls with basket priority: ground and basket control boxes each have emergency stop, and a manual pump gives emergency descent.

Technical Specifications

Configuration4x2 truck-mounted aerial platform, turntable and basket behind the cab
Max working height14 m
Max working radius7.5 m
Platform rated load200 kg, 2 persons
Rotation360 degrees continuous slew
Boom typeTelescopic 2-3 section standard; articulated knuckle boom quoted where over-obstacle reach is needed
Outriggers4 hydraulic H-type, individually controlled; 640 mm front and 180 mm rear protraction
GVW / curb weight7,445 kg / 7,250 kg
Overall dimensions8,300 x 2,200 x 3,300 mm
Wheelbase / track3,800 mm / 1,770 mm front and 1,586 mm rear
Engine91 kW / 3,856 ml diesel
Transmission5-6 speed manual; automated manual or automatic optional
Max road speed99 km/h
BrakesAir brake with ABS, exhaust brake and spring parking brake
Tires7.50-16, 6 tires; 7.50R16 to 10.00R20 by chassis
Lifting hook1,000 kg where specified, quoted apart from basket load
Safety systemsTilt and overload protection, limit switches, basket levelling, emergency lowering valve and manual pump

Models and Options

The quoted model is the 4x2 unit. A 4x4 chassis is available for rough ground, and a 6x4 chassis can be specified with a longer boom and a larger platform. Telescopic 2-3 section boom is standard; an articulated knuckle boom is quoted where the basket must reach over a roof edge, a sign or a tree crown. Left-hand and right-hand drive, air conditioning, manual or automated manual or automatic transmission and air suspension are selected at order.

Materials and Structure

Boom and mast use welded high-strength steel box section in Q345 and Q460 plate with reinforcement at pivot and hinge points. The turntable and base frame are Q345 steel plate with a machined slew ring and hardened pinions. The basket has a steel or aluminium checker plate floor, 1.1 m guardrails with mid-rail and toe board, and an anti-slip pattern plate with drainage holes. Outrigger beams and legs are high-strength steel with forged feet; hydraulic cylinders use honed steel tubes and hard-chrome plated piston rods; hoses are two-wire braided rubber with crimped fittings. The chassis frame is Q235/Q345 channel 6-8 mm, and the cab is welded steel with tempered glass, anti-corrosion primer and polyurethane topcoat.

Applications

Power distribution and utility companies use the unit for overhead line work. Street lighting and municipal maintenance departments use it for lamp and sign service. Telecom and fibre operators use it for aerial network maintenance; construction contractors use it for facade, roof and structure work. Painting, coating, cladding, signage, billboard installation, tree care and facilities management are also supported, along with airport, port, railway yard, oil and gas plant, wind and solar farm inspection where high access is needed.

Customization

Order configuration can include left-hand or right-hand drive, air conditioning, an engine matched to local fuel sulphur levels, tropical cooling and dust protection for hot and dry sites, and a cold-start package for winter work. Transmission can be manual, automated manual or automatic, and air suspension is optional. An articulated knuckle boom, a 1,000 kg lifting hook, rubber or nylon outrigger pads and a steel or aluminium basket floor are quoted by application. Export documents are prepared as one set, and units ship by container, flat rack or RoRo under FOB, CIF or DAP terms.

Frequently Asked Questions

What is the maximum working height?

The quoted truck-mounted unit has a 14 m maximum working height and a 7.5 m maximum working radius.

How many people can the basket carry?

The basket is rated 200 kg for two persons plus tools.

Does the platform rotate?

Yes. The turntable provides 360 degrees continuous slew with an anti-drop safety system.

What engine and road speed are quoted?

The quoted 4x2 unit uses a 91 kW / 3,856 ml diesel engine, a 5-6 speed manual transmission and a 99 km/h maximum road speed.

Can it be used as a crane?

A 1,000 kg lifting hook can be specified, but it is quoted apart from the 200 kg basket load and the two ratings must not be mixed.

What outrigger setup is required?

Four hydraulic H-type outriggers with 640 mm front and 180 mm rear protraction must be set and the unit levelled before the boom is operated.

Can I order 4x4 or 6x4?

Yes. A 4x4 chassis is offered for rough ground, and a 6x4 chassis can be specified with a longer boom and a larger platform.

What is the lead time?

Lead time is about 30-45 working days from down payment.

Inquiry Information

For configuration and export quotation, contact Henan Elorry Industrial Co., Ltd. Please state working height, chassis drive, boom type, basket load and destination port.

Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com

Address: Zhengzhou City, Henan Province, China | Website: www.elorry-ind.com

Image Filename and Alt Suggestions

  • aerial-platform-truck-apt14-4x2-360-slew-front.png — Alt: ELORRY 14m 4x2 aerial platform truck front view with boom stowed
  • aerial-platform-truck-apt14-outriggers-spread.png — Alt: Outriggers and chassis detail on the 14m truck-mounted aerial platform
  • aerial-platform-truck-apt14-basket-controls.png — Alt: Basket and dual control station on the aerial platform truck