меню

4x2 Folding Knuckle Boom Crane Truck 20 Tonne-Metre Moment

в наличии:
SKU: 3724730861
модель: Crane Truck

{{ variable.name }}

{{ value.name }}
4x2 Truck-Mounted Crane

4x2 Folding Knuckle Boom Crane Truck 20 Tonne-Metre Moment

A 4,000 kg knuckle boom crane truck that carries its own load to site and lifts it without a second machine or a hired mobile crane. The folding boom stows inside the vehicle width behind the cab, so the cargo bed stays clear.

SEO Title: 4,000 kg Knuckle Boom Crane Truck on 4x2 Chassis for Site Lifting
Meta Description: 4,000 kg knuckle boom crane truck on a 4x2 chassis, 20 tonne-metre moment, about 3,300 kg at 6 m, 7.815 m radius and partial-spread outrigger charts included.
URL Slug: /knuckle-boom-crane-truck-4t-4x2

Product Summary

This crane truck pairs a 4,000 kg folding boom with a 20 tonne-metre lifting moment on a 4x2 commercial chassis. Capacity is quoted with the radius: about 3,300 kg at 6 m and about 2,400 kg at 7.8 m, with a maximum working radius of 7.815 m and a maximum lifting height of 10 m. GVW on the quoted 4x2 unit is 12,005-16,000 kg and curb weight is 5,880-6,050 kg with the crane, subframe and body fitted.

Knuckle boom crane truck with the folding boom stowed behind the cab
Folding boom stowed inside the vehicle width, cargo bed left clear.
Truck-mounted crane lifting a load at site with outriggers deployed
Outriggers deployed on site, lift taken from the load chart at the working radius.

Key Features

Bed Stays Clear With A Folding Boom

The knuckle boom stows inside the vehicle width behind the cab, so one truck delivers the load and lifts it and the body behind the crane is not taken up.

Capacity Read At The Radius That Applies

20 tonne-metre lifting moment: about 3,300 kg at 6 m and about 2,400 kg at 7.8 m. The load chart ships with the unit and the lift is checked from the actual radius and boom length.

Outriggers Sized For Real Sites

Box-section H-type front and rear legs with full and partial spread, 2.2-5.5 m lateral across the range, each spread quoted as its own capacity column for kerbsides and narrow lanes.

Hydraulics A Local Workshop Can Service

Open-centre system at 16-35 MPa on a gearbox power take-off, hard-chrome plated piston rods, and seal kits and hoses shipped as a spare-parts kit.

4x2 Chassis Matched To The Crane

132-180 hp diesel, 4.5-5.9 L, Euro II to Euro V matched to local fuel, 6-speed manual, 6,000 kg front and 10,000 kg rear axles, air brake with ABS.

Safety On The Lifting Circuit

Load moment limiter available, pressure relief and check valves, and an alarm that sounds when an outrigger is not fully deployed.

Technical Specifications

ParameterSpecification
Crane typeFolding (knuckle) boom, mounted behind the cab
Rated capacity4,000 kg
Lifting moment20 tonne-metres
Capacity at radiusAbout 3,300 kg at 6 m; about 2,400 kg at 7.8 m
Max working radius7.815 m
Max lifting height10 m
Crane self-weight1,500 kg, deducted from chassis payload before body sizing
Outriggers and controlsHydraulic H-type front and rear legs, box section, 2.2-5.5 m spread full and partial; manual lever bank at the crane base, proportional radio remote optional
HydraulicsOpen centre, gearbox power take-off, 16-35 MPa
Chassis and wheelbase4x2, 4,700-5,000 mm
GVW and curb weight12,005-16,000 kg / 5,880-6,050 kg with crane, subframe and body
Overall dimensions8,600-9,000 x 2,500 x 3,200-3,650 mm
Engine and transmissionDiesel 132-180 hp (97-132 kW), 4.5-5.9 L, Euro II to Euro V; manual 6-speed
Brakes and tyresAir brake with ABS, exhaust brake, spring parking brake; 9.00R20, 6 tyres plus one spare
Cargo bodyDrop-side body, 3-9 m body length available, 3-5 mm steel or checker plate floor
Max speed90-100 km/h

Models and Options

  • Chassis class: 4x2 for 2,000-8,000 kg cranes in city work; 6x4 for 8,000-16,000 kg; 8x4 for 16,000-25,000 kg and long cargo bodies.
  • Crane class across the line: 2,000-25,000 kg rated capacity and 8-60 tonne-metres lifting moment.
  • Boom family: folding (knuckle) as on this unit, or straight (telescopic) where the higher vertical lift is required.
  • Crane position: behind the cab with the body behind it, or a rear-mounted crane on a longer body.
  • Cab: 2-3 seats, day cab standard with sleeper optional, left-hand or right-hand drive.
  • Boom equipment and chassis hardware: 2-5 hydraulic extensions with fly jib optional; 8.25R16 to 12.00R20 tyres, hub reduction optional, leaf springs standard with air suspension optional.

Materials and Structure

Boom, column and knuckle joints are welded high-strength steel box section in Q345 or Q460 plate, with Q345 reinforcement plates at the pivot points. The subframe is Q345 channel or box section, bolted and welded to the chassis rails.

  • Outrigger beams and legs: high-strength steel with cast or forged feet and nylon wear sliders.
  • Cylinders: honed steel tubes with hard-chrome plated piston rods, nitrile and polyurethane seals.
  • Hoses and fittings: two-wire braided rubber with crimped steel fittings.
  • Cargo body: Q235/Q345 steel, 3-5 mm floor plate, double-wall drop sides.
  • Finish and fasteners: anti-corrosion primer plus polyurethane topcoat, galvanised bolts and stainless clamps.

Applications

  • Construction and building material supply; precast concrete, steel, glass and panel handling.
  • Utility and power line maintenance; municipal works, street lighting and sign installation.
  • Landscaping, nursery and tree care; warehousing, container yards and freight depots.
  • Equipment rental and leasing fleets, where one vehicle covers delivery and unloading.

Customization

Boom type, crane class, chassis, body length and crane position are fixed before the order. Sales engineers ask for the heaviest load, the longest radius, site access and ground, the cargo carried and the local rules on lifting equipment, then size the truck so it is not bought twice. Left- or right-hand drive, radio remote control, fly jib, air suspension and hub reduction are selected at the same stage, and crane booms and attachments can be built to a customer mounting interface and dimensions.

Case Study

A construction contractor and equipment rental operator in the Philippines took one complete crane truck, configured to the lifting duty on its own sites. The unit was installed in September 2025 with on-site assembly and commissioning; at about 14 months in service the recorded result is good performance, reliability and site adaptability, and the client is reported as highly satisfied.

Crane truck on a 4x2 chassis during on-site assembly and commissioning
Complete crane truck delivered to the Philippines, assembled and commissioned on site.

FAQ

What can this crane actually lift?

The 4,000 kg figure is the rating; the working number comes from the load chart at the radius used, about 3,300 kg at 6 m and about 2,400 kg at 7.8 m on the 20 tonne-metre unit.

Does the folding boom take cargo space?

No. The knuckle boom stows inside the vehicle width behind the cab, so the body behind it stays clear for pallets, bricks, steel or precast units.

Can the crane work when the outriggers cannot fully spread?

Yes, on the partial-spread chart. Full and partial spread are quoted as separate capacity columns, and an alarm sounds when an outrigger is not fully deployed.

How is the payload budget calculated?

GVW is 12,005-16,000 kg and curb weight 5,880-6,050 kg with crane, subframe and body. The 1,500 kg crane self-weight on the quoted unit is deducted from the chassis payload before the body is sized.

What are the lead time and warranty terms?

About 30-45 working days from down payment, with a 12-month warranty on major components; hydraulic valves and cylinders are covered under supplier terms.

How is the unit shipped?

By RoRo or container depending on unit height, under FOB, CIF or DAP terms. Invoice, packing list, bill of lading, certificate of origin and insurance are prepared together, and the hydraulic system is drained and protected for the sea passage.

Inquiry Information

Send the heaviest load, the longest radius, the site access and ground, the cargo carried and the local rules on lifting equipment. Sales engineers reply with the boom type, crane class, chassis and body length that fit the duty.

Henan Elorry Industrial Co., Ltd. | Tel +86-13083602803 | WhatsApp +86-16638078903 | info@elorry-ind.com | Zhengzhou City, Henan Province, China

Image Filenames and Alt Text

  • crane-truck-knuckle-4t-4x2-boom-stowed.png - Knuckle boom crane truck with the folding boom stowed behind the cab
  • crane-truck-knuckle-4t-4x2-outriggers-site.png - Truck-mounted crane lifting a load at site with outriggers deployed
  • crane-truck-4x2-philippines-commissioning.png - Crane truck on a 4x2 chassis during on-site assembly and commissioning

Hydraulic spare-parts kit, export documents and optional radio remote control are quoted with each unit.