меню

4x2 Light Tipper Truck For Tight Streets And Urban Delivery

в наличии:
SKU: 0449819159
модель: Tipper Truck

{{ variable.name }}

{{ value.name }}

4x2 Light Tipper Truck For Tight Streets And Urban Delivery

4x2 light tipper truck with steel body ready for urban material haulage
4x2 light tipper truck with steel tipping body and in-cab PTO control.

Product Summary

The ELORRY 4x2 light tipper truck covers 3,500 kg, 7,500 kg and 12,000 kg GVW classes for tight streets, urban works and light construction haulage. Body volume is about 2-6 m³. The steel tipping body uses Q235 or Q345 structural steel, a reinforced front wall and a 12-25 s tipping cycle. A gearbox PTO with in-cab control drives the tipping pump. For export, 4x2 units can ship in a 40-foot container with the body removed or knocked down. Larger tippers ship by flat rack, RoRo or bulk vessel.

Key Features

Road-rule GVW match

3,500 / 7,500 / 12,000 kg GVW classes and 4x2 drive let buyers match local axle-load and licence rules instead of running an oversized truck.

Compact 2-6 m³ body

About 2-6 m³ body volume suits sand, gravel, spoil and light construction loads where access is tight and trips are short.

Fast tip and go

A 45-55° tip angle, 12-25 s lifting time and in-cab PTO control keep the truck working through the day instead of waiting on manual handling.

Steel body for mixed loads

Q235 or Q345 steel, 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall handle rubble and general site material; wear-resistant plate is optional.

Container-friendly export

4x2 units can ship in a 40-foot container with the body removed or knocked down, and mixed body types and GVW classes can be consolidated in one shipment.

Technical Specifications

ItemSpecification
GVW classes3,500 / 7,500 / 12,000 kg
Drive4x2
Body volumeAbout 2-6 m³
Body internal size rangeL 2,400-7,600 mm × W 1,800-2,450 mm × D 400-1,400 mm
Tipping angle45-55°
Lifting / lowering time12-25 s / 10-20 s
Working pressure160-200 bar
EngineDiesel 4 or 6 cylinders, 2.8-9.5 L, 130-400 hp
EmissionEuro II, III, IV or V; Euro VI on request
Transmission6-12 forward speeds, 1-2 reverse, manual; AMT optional
Tipping controlGearbox PTO driving the tipping pump, in-cab control
BrakesDual-circuit air brake, ABS, engine exhaust brake; retarder optional
SteeringHydraulic power steering; left-hand or right-hand drive
Tires195/75R16 to 12R22.5, tubeless standard
Fuel tank80-400 L
Maximum speed80-100 km/h; speed limiter available
Minimum turning radius5.5-9.5 m
Working temperature-20 to 45°C with cold-start and tropical packages
Warranty12 months for major components with spare-parts support
Lead timeAbout 30 days for orders under 20 units; stock models ship faster

Models and Options

ConfigurationOptions
GVW classes3,500 / 7,500 / 12,000 kg
Drive4x2
Body volumeAbout 2-6 m³
Body stylesSteel, aluminum, triple-drop-side, three-way, tool carrier
Cab2-3 persons, day cab standard, sleeper cab optional
EmissionEuro II, III, IV or V; Euro VI on request
SteeringLeft-hand or right-hand drive
Load coverManual roll-over sheet or electric tarpaulin system

Materials and Structure

The tipping body uses Q235 or Q345 high-strength structural steel, with a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall. Cross bearers support the floor, and wear-resistant plate is optional for rubble and rock. The subframe is bolted and rubber-mounted to the chassis rails to spread tipping loads. The chassis is a carbon structural steel ladder frame with reinforced cross members. The cab is a welded steel body with tempered glass and anti-corrosion coating. Hydraulics use a hard-chrome-plated telescopic cylinder, high-pressure hose and steel pipe. The tailgate can be top-hinged or pendulum type with manual or automatic release. The load cover can be PVC tarpaulin or aluminum roll-over slats.

Steel tipping body and hydraulic cylinder on a 4x2 light tipper truck
Steel tipping body with reinforced front wall and hydraulic lifting system.

Applications

  • Construction and civil engineering sites
  • Road construction and maintenance: base course, spoil and milling waste
  • Landscaping, garden centres and sports turf: soil, mulch, sand and stone
  • Utilities and drainage: trench spoil, pipe bedding and reinstatement
  • Aggregates, sand, gravel and stone yards
  • Municipal works: street cleansing, green waste and fly-tipping clearance
  • Plant hire and rental fleets

Customization

  • Side extensions, ladder rack, beacon bar and reverse alarm
  • Body heater for asphalt; grain discharge hatch
  • Top-hinged or pendulum tailgate, manual or automatic release
  • Manual roll-over sheet or electric tarpaulin system
  • Left-hand or right-hand drive; Euro II-V or Euro VI on request
  • AMT, rear air suspension, retarder and speed limiter
  • Cold-start and tropical packages for -20 to 45°C operation

FAQ

What GVW classes are available?

Rigid tippers cover 3,500 / 7,500 / 12,000 / 18,000 / 26,000 / 32,000 kg. The 4x2 light class uses 3,500 / 7,500 / 12,000 kg.

How much body volume does the 4x2 tipper carry?

The 4x2 class is about 2-6 m³. The full rigid range is 2-22 m³, with 6x4 about 8-16 m³ and 8x4 about 16-22 m³.

Can the truck ship in a container?

Yes. 4x2 units can ship in a 40-foot container with the body removed or knocked down. Larger tippers ship by flat rack, RoRo or bulk vessel.

What is the tipping cycle?

Lifting takes 12-25 s, lowering 10-20 s, with a 45-55° tip angle and 160-200 bar working pressure.

Which engines and emissions are offered?

Diesel 4 or 6 cylinder engines, 2.8-9.5 L, 130-400 hp, with Euro II, III, IV or V; Euro VI on request.

What warranty and lead time apply?

12 months for major components with spare-parts support. Lead time is about 30 days for orders under 20 units; stock models ship faster.

Can you match local axle limits?

Yes. Sales engineers compare material density, site access, tip height, bridge and axle limits and the local registration class, then recommend GVW, body volume and tipping direction.

Inquiry Information

Share your material density, site access, tip height, bridge and axle limits, and local registration class. ELORRY sales engineers will recommend the GVW, body volume and tipping direction for your route.

Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China

Image Filename and Alt Suggestions

  • tipper-truck-4x2-light-urban-tipping.png — 4x2 light tipper truck with steel body tipped for urban material discharge
  • tipper-truck-4x2-light-body-detail.png — Steel tipping body and hydraulic cylinder on a 4x2 light tipper truck
  • tipper-truck-4x2-light-container-loading.png — 4x2 light tipper truck prepared for container export with body knocked down