меню

5,000 m Altitude Screw Air Compressor for Plateau Oxygen Generation

в наличии:
SKU: 512365142X
модель: On-board Air Compressor (NEV)

{{ variable.name }}

{{ value.name }}
PLATEAU RAIL AND COACH AIR SUPPLY

5,000 m Altitude Screw Air Compressor for Plateau Oxygen Generation

On-board screw airend with altitude oxygen compensation intake port, -40 C to +50 C design and oil carry-over of 3 ppm or less.

SEO Title: 5,000 m Altitude Screw Air Compressor for Plateau Oxygen Generation

Meta Description: High-altitude on-board screw air compressor for plateau oxygen generation: 5,000 m operation, altitude compensation intake, -40 to +50 C design, oil carry-over 3 ppm or less.

URL Slug: high-altitude-screw-air-compressor-plateau-oxygen

Product Summary

Plateau rail and coach oxygen-generation systems need a compressed air source that keeps working when the air is thin and the day-to-night temperature swing is large. This on-board screw air compressor is configured with an altitude oxygen compensation intake port and is designed for -40 C to +50 C, with oil carry-over of 3 ppm or less so that downstream dryers, precision filters and oxygen or nitrogen generators receive clean, water-free air. The 9-in-1 architecture keeps the screw airend, oil-gas separator tank with built-in coarse separator, three filters and four valves in one package of 410 x 330 x 310 mm and 45 kg for underframe installation. Free air delivery is 0.25-0.4 m3/min at 7 bar and maximum working pressure is 12.5 bar, with noise held to 75 dB(A) or lower.

Key Features

Altitude Compensation Intake Port

Part of the plateau configuration that sustained stable pressure and delivery at altitudes up to 5,000 m in the referenced rail project.

-40 C to +50 C Design

Covers the large day and night temperature difference of high-altitude operation.

Oil Carry-Over 3 ppm or Less

Standard specification is below 2 ppm with a design limit of 3 ppm, keeping air clean for oxygen and nitrogen generation.

9-in-1 Integrated Layout

Airend, separator tank, three filters and four valves in one body reduce piping runs and leak points on rail vehicles.

45 kg, 410 x 330 x 310 mm

Compact envelope suits underframe and equipment-cabinet installation on locomotives and coaches.

Noise 75 dB(A) or Lower

Supports passenger-area and crew-cab noise requirements on rail vehicles.

Technical Specifications

Power2.2-4 kW
Speed3500 rpm
Free air delivery at 7 bar0.25-0.4 m3/min
Working pressureMaximum 12.5 bar / minimum 5 bar
Maximum discharge temperature105 C
Oil carry-overBelow 2 ppm standard (design limit 3 ppm); 3 ppm or less for the plateau configuration
Noise75 dB(A) or lower
Net weight45 kg
Dimensions (L x W x H, excl. air filter assembly)410 x 330 x 310 mm
Altitude configurationAltitude oxygen compensation intake port, operation up to 5,000 m; -40 C to +50 C design
Configuration9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters + 4 valves
Motor options24 V DC / 540 V DC
Housing materialHigh-grade cast iron (aluminium-alloy housing under development)

Models and Options

  • Plateau configuration with altitude oxygen compensation intake port for operation up to 5,000 m.
  • Motor voltage options of 24 V DC or 540 V DC.
  • Air filter optional alongside the external fine oil separator and oil filter.
  • Housing in high-grade cast iron, with an aluminium-alloy housing under development.

Materials and Structure

  • High-grade cast iron housing; screw rotors in forged alloy steel with a German-designed UV patented rotor profile, 20+ precision machining steps and micron-level accuracy.
  • SKF heavy-duty rolling bearings and triple-sealing shaft seal technology.
  • Built-in coarse separator plus oversized external fine separator for oil removal.
  • Patent portfolio covers the rotor profile (ZL2012 1 0087353.0), improved airend structure (ZL2008 1 0087353.0), vehicle air compressor (ZL2010 1 0110513.X) and anti-oil-emulsification method and system (ZL2025 1 1888313X).

Applications

The main use is clean, water-free compressed air for on-board oxygen and nitrogen generation in plateau locomotive and coach oxygen-enrichment systems, working together with an oxygen or nitrogen generator, air dryer and precision filter. The altitude configuration is also relevant to high-altitude mining engineering vehicles, rail auxiliary air supply, and new energy commercial vehicles operating on plateau routes.

Customization

The altitude configuration is specified against project altitude, air dryer and generator requirements, with motor voltage selected per vehicle platform (24 V DC or 540 V DC). For retrofit and aftermarket programmes, the unit is dimensioned for drop-in replacement of existing airends; the contractor referenced below reports CE-compliant supply and a purchase cost 25-30% lower than comparable European airends of equivalent performance.

Case Study - Plateau Locomotive and Coach Oxygen Supply Project

300 units over two years supplying clean, water-free compressed air for on-board oxygen and nitrogen generation, with normal operation at altitudes up to 5,000 m and stable pressure and delivery. The highlight of the configuration: altitude oxygen compensation intake port, -40 C to +50 C design and oil carry-over of 3 ppm or less.

A second reference is the project contractor for the same programme, with approximately 300 units shipped cumulatively over two years for aftermarket replacement and vehicle air system retrofit. Reported results: CE-compliant supply at a purchase cost 25-30% lower than comparable European airends with equivalent performance, drop-in replacement dimensions, and a 4-5 week lead time against 8-10 weeks for imported units.

FAQ

How high can the plateau configuration operate?

Up to 5,000 m, as demonstrated in the plateau locomotive and coach oxygen supply project.

What is the operating temperature range?

The plateau configuration is designed for -40 C to +50 C, covering the large day and night temperature difference at altitude.

How clean is the air sent to the oxygen generator?

Oil carry-over is below 2 ppm to standard specification with a design limit of 3 ppm, and 3 ppm or less for the plateau configuration, together with the air dryer and precision filter in the system.

Which auxiliary equipment is matched to the unit?

Oxygen or nitrogen generator, air dryer and precision filter, with continuous duty during plateau operation.

Can it replace an imported airend in a retrofit?

Yes. The retrofit programme referenced above used drop-in replacement dimensions with a 4-5 week lead time, against 8-10 weeks for imported units.

Which certifications apply to rail projects?

Rail transit product certification for air supply units on locomotives, EMU, metro and freight trains, plus CE under TUV Rheinland (CE-WSD-GCU-2023-001), IATF 16949 and ISO 9001:2015 by SGS.

What are the power, pressure and flow figures?

2.2-4 kW, 3500 rpm, free air delivery of 0.25-0.4 m3/min at 7 bar, minimum 5 bar and maximum 12.5 bar working pressure, maximum discharge temperature 105 C.

Inquiry Information

Supplier: Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m2 facility, 12,000 units annual output.

Email: service@woyo.cn  |  Tel: +86 510 8599 6655  |  WhatsApp: +86 189 1237 9878

Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China

Share the project altitude, generator or dryer specification and the existing mounting dimensions so the plateau configuration can be confirmed.

Image Filename and Alt Suggestions

  • high-altitude-screw-air-compressor-plateau-intake.png - Alt: Altitude oxygen compensation intake port on plateau rail screw air compressor
  • high-altitude-screw-air-compressor-plateau-unit.png - Alt: Integrated 9-in-1 screw air compressor unit for plateau oxygen generation
  • high-altitude-screw-air-compressor-plateau-underframe.png - Alt: Screw air compressor installed under a plateau coach frame