меню

6x4 Boom Wrecker Truck with 12,300 mm Lift Height and Underlift

в наличии:
SKU: 0441716954
модель: Wrecker Truck

{{ variable.name }}

{{ value.name }}
6X4 BOOM AND UNDERLIFT

6x4 Boom Wrecker Truck with 12,300 mm Lift Height and Underlift

This 6x4 boom wrecker truck is the medium and heavy recovery unit: a 3-section telescopic boom with 12,300 mm lifting height and 10,710 mm working radius, a 3,350 mm underlift, and two 200 kN hydraulic winches. It lifts and tows at the same time for truck and semi-trailer recovery.

6x4 boom wrecker truck with telescopic boom and underlift, side view

SEO Title: 6x4 Boom Wrecker Truck with 12,300 mm Lift and 3,350 mm Underlift

Meta Description: 6x4 boom wrecker truck with 12,300 mm lift height, 10,710 mm working radius, 3,350 mm underlift and two 200 kN winches for truck and semi-trailer recovery.

URL Slug: /products/6x4-boom-wrecker-truck-underlift

Product Summary

The 6x4 chassis is quoted for 12,000-25,000 kg medium and heavy recovery. The boom rating is stated at the working radius: 20,000-30,000 kg at the top of the lift and 8,300-12,500 kg fully extended. The underlift arm reaches 3,350 mm and the fork lifts to 1,835 mm, so a low car or a raised truck axle can be picked up.

Key Features

  • 3-section telescopic boom with 12,300 mm lift height and 10,710 mm working radius for righting and lifting at the scene.
  • 3,350 mm underlift with 1,650 mm telescopic stroke and 1,835 mm fork height picks up a semi-trailer axle or low-slung car.
  • Two 200 kN hydraulic winches with 22 mm wire rope, 60 m per drum and 5 m/min minimum line speed.
  • Front H-type and rear L-type outriggers spread the load over a 7,760 mm front-to-rear footprint.
  • Imported multi-way and balance valves, hard-chrome cylinder rods and a spare seal kit support workshop repair.
  • LED warning bar, arrow board, rear chevron and work lights for night and hard-shoulder work.

Technical Specifications

Drive configuration6x4
Recovery class12,000-25,000 kg medium and heavy
Boom3-section telescopic welded box section
Basic boom length5,580 mm
Cylinder stroke6,000 mm on heavy units
Max lifting height12,300 mm
Max working radius10,710 mm
Boom angle0-60 degrees
Lift capacity20,000-30,000 kg at top; 8,300-12,500 kg fully extended
Winch1-2 hydraulic winches, 200 kN each on heavy models
Wire rope22 mm 6x25Fi+IWR1870, 60 m per drum, 5 m/min minimum
Underlift3,350 mm max effective length; 1,650 mm stroke
Fork heightUp to 1,835 mm
Outrigger spansFront 6,200 mm, rear 4,030 mm, front-to-rear 7,760 mm
EngineDiesel 95-315 hp, 3.9-8.9 L, Euro II to Euro V
TransmissionManual 5-10 speeds, automated manual optional
BrakesAir brake with ABS, exhaust brake, spring parking brake
Max speed90-95 km/h; towed vehicle about 40 km/h

Models and Options

Boom rating, underlift forks, winch count, outrigger type, left- or right-hand drive, engine emission, sleeper cab, air suspension and hub reduction are selected at order. A load-moment limiter and pressure gauge are optional.

Underlift and boom control area on a 6x4 recovery truck

Materials and Structure

The boom and lifting frame use welded high-strength steel box section, H70 grade for key and stressed members, with Q345 reinforcement plates at pivot points. Cylinders have honed tubes and hard-chrome rods; outrigger beams use high-strength steel with forged or cast feet.

Applications

Truck and bus recovery, highway breakdown and accident removal, semi-trailer recovery, righting rolled or jackknifed units, ditch recovery, construction equipment recovery, dealership and workshop support.

Customization

LHD or RHD, engine matched to local fuel, tropical cooling, cold-start package, warning equipment to local rules, boom rating, underlift forks and winch count.

Case Study

A highway rescue operator and road authority in Jordan took two units for highway breakdown recovery and accident vehicle removal. The project scale is typically two years in service. The reported result was reliable recovery duty with faster clearance of incident vehicles. The configuration highlighted underlift and boom, winch capacity, stabilising outriggers and night working lights.

FAQ

Why is lift capacity quoted at the working radius?

The 6x4 is rated 20,000-30,000 kg at the top of the lift but 8,300-12,500 kg fully extended, so the number must match the radius of the job.

Can it lift a semi-trailer axle?

The heavy underlift has a 3,350 mm effective length, 1,650 mm stroke and fork height up to 1,835 mm for axle or frame lifting.

How many winches are available?

One or two hydraulic winches; heavy models quote 200 kN each with 22 mm rope and 60 m per drum.

What outrigger footprint is used before lifting?

Front H-type and rear L-type outriggers give front 6,200 mm, rear 4,030 mm and front-to-rear 7,760 mm spans.

Can the boom rotate?

Heavy-duty rotator models offer 360 degrees continuous rotation; non-rotator boom units use a fixed A-frame or part rotation.

What is the lead time and warranty?

About 30-45 working days from down payment; 12 months for major components, with hydraulic valves and cylinders under supplier terms.

Inquiry Information

Send the unit to be recovered, heaviest unit weight, road and site conditions, climate and local warning-equipment rules. Sales engineers confirm boom rating, underlift forks and winch count before order.

Tel +86-13083602803 | WhatsApp +86-16638078903 | Email info@elorry-ind.com

Henan Elorry Industrial Co., LTD., Zhengzhou, Henan, China | www.elorry-ind.com

Image Filename and Alt Suggestions

  • ID 256: elorry-6x4-boom-wrecker-boom-side.jpg - Alt: 6x4 boom wrecker truck with telescopic boom and underlift, side view.
  • ID 255: elorry-6x4-boom-wrecker-underlift.jpg - Alt: Underlift arm and fork on a 6x4 boom recovery truck.
  • ID 254: elorry-6x4-boom-wrecker-outrigger.jpg - Alt: Front outrigger and boom base on a heavy recovery truck.
  • ID 250: elorry-6x4-boom-wrecker-winch.jpg - Alt: Hydraulic winch and wire rope drum on a boom wrecker.
  • ID 249: elorry-6x4-boom-wrecker-rear.jpg - Alt: Rear warning lights and underlift on a 6x4 recovery truck.

Image IDs match the product gallery; use the filename and alt text for the final upload.