меню

8,000 Kg Telescopic Boom Crane Truck 11.5 M Working Radius

в наличии:
SKU: 4202288718
модель: Crane Truck

{{ variable.name }}

{{ value.name }}
Straight Boom 4x2

8,000 Kg Telescopic Boom Crane Truck 11.5 M Working Radius

An 8,000 kg straight-boom crane truck on a 4x2 chassis with 13.5 m maximum lifting height and 11.5 m maximum working radius, plus a 5,400-5,550 x 2,294 x 600 mm drop-side cargo body built around the crane position.

SEO Title: 8,000 kg Telescopic Boom Crane Truck with 11.5 m Working Radius
Meta Description: 8,000 kg telescopic boom crane truck with 11.5 m working radius and 13.5 m lifting height, plus a 5,550 mm steel drop-side cargo body on a 4x2 chassis.
URL Slug: /telescopic-boom-crane-truck-8t-4x2

Product Summary

The straight (telescopic) boom gives the higher vertical lift of the two boom families: up to 13.5 m lifting height and 11.5 m working radius on this 8,000 kg crane truck. The boom runs on 2-5 hydraulic extensions with a fly jib optional, and the drop-side body on the quoted straight-arm unit measures 5,400-5,550 x 2,294 x 600 mm. Capacity is always quoted together with the radius, and the load chart ships with the unit.

Telescopic boom crane truck with the straight boom extended on a 4x2 chassis
Straight boom extended for a high lift, load lowered on a rope.
Crane truck drop-side cargo body with removable posts and lashing points
Drop-side body behind the crane, with removable posts and lashing points.

Key Features

Straight Boom Reaches Higher

13.5 m maximum lifting height and 11.5 m maximum working radius, with 2-5 hydraulic boom extensions and the load lowered on a rope rather than carried on a knuckle.

Capacity Quoted With The Radius

The load chart ships with every unit and the lift is checked from the actual radius and boom length, so the shortest-radius figure is not used to plan the job.

Cargo Body Built Around The Crane

5,400-5,550 x 2,294 x 600 mm drop-side body with removable posts, rope hooks and lashing points; body length is fixed to the crane position so the boom never fouls the load.

Payload Budget Settled Before The Order

GVW 12,005-16,000 kg and curb weight 5,880-6,050 kg with crane, subframe and body, so GVW, rear-axle load and the remaining cargo capacity are confirmed before the chassis is specified.

Outriggers Sized For Real Sites

Box-section H-type front and rear legs, 2.2-5.5 m lateral spread across the range, with full and partial spread quoted as separate capacity columns.

Hydraulics Chosen For Service Markets

Open-centre system at 16-35 MPa on a gearbox power take-off, hard-chrome cylinder rods, and seal kits and hoses shipped as a spare-parts kit.

Technical Specifications

ParameterSpecification
Crane typeStraight (telescopic) boom, truck-mounted
Rated capacity8,000 kg
Max working radius11.5 m
Max lifting height13.5 m
Boom sections2-5 hydraulic extensions, fly jib optional
Lifting moment across the range8-60 tonne-metres, quoted as load multiplied by radius
OutriggersHydraulic H-type front and rear legs, box section, 2.2-5.5 m spread, full and partial
ControlsManual lever bank at the crane base; proportional radio remote control optional
HydraulicsOpen centre, gearbox power take-off, 16-35 MPa
Chassis and wheelbase4x2, 4,700-5,000 mm
GVW and curb weight12,005-16,000 kg / 5,880-6,050 kg with crane, subframe and body
Overall dimensions8,600-9,000 x 2,500 x 3,200-3,650 mm
Engine and transmissionDiesel 132-180 hp (97-132 kW), 4.5-5.9 L, Euro II to Euro V; manual 6-speed
Brakes and tyresAir brake with ABS, exhaust brake, spring parking brake; 9.00R20, 6 tyres plus one spare
Cargo body5,400-5,550 x 2,294 x 600 mm drop side, 3-5 mm steel or checker plate floor
Max speed90-100 km/h

Models and Options

  • Chassis class: 4x2 for 2,000-8,000 kg cranes; 6x4 for 8,000-16,000 kg; 8x4 for 16,000-25,000 kg and long cargo bodies, with GVW 18,000-31,000 kg and wheelbase 5,700-7,500 mm on those larger chassis.
  • Crane class across the line: 2,000-25,000 kg rated capacity, 8-60 tonne-metres, 3-16 m working radius.
  • Boom family: straight (telescopic) as on this unit, or folding (knuckle) where the bed must stay clear.
  • Slewing: 360 degrees continuous on the larger cranes, limited arc on the light units.
  • Body and cab: 3-9 m body length, 600-800 mm side walls with removable posts; 2-3 seat cab, day cab standard with sleeper optional, left-hand or right-hand drive.
  • Chassis hardware: 8.25R16 to 12.00R20 tyres, hub reduction optional, leaf springs standard with air suspension optional.

Materials and Structure

Boom, column and knuckle joints are welded high-strength steel box section in Q345 or Q460 plate, reinforced with Q345 plates at the pivot points. The subframe is Q345 channel or box section, bolted and welded to the chassis rails, and the cargo body is Q235/Q345 steel with a 3-5 mm floor plate and double-wall drop sides.

  • Outrigger beams and legs: high-strength steel with cast or forged feet and nylon wear sliders.
  • Cylinders and hoses: honed steel tubes, hard-chrome plated piston rods, nitrile and polyurethane seals, two-wire braided rubber hose with crimped steel fittings.
  • Deck and finish: checker plate or anti-slip coating, anti-corrosion primer plus polyurethane topcoat, galvanised bolts and stainless clamps.

Applications

  • Construction and building material supply, where the higher lifting height places loads on upper floors and racks.
  • Ports and terminals, container yards, freight depots and warehousing.
  • Oil, gas and pipeline maintenance; mining and quarry support; road maintenance and guardrail work.
  • Machinery moving, rigging and installation contractors; waste collection and recycling yards.

Customization

Boom sections, fly jib, crane position, body length and chassis class are fixed before the order, from the heaviest load, the longest radius, the site access and ground, the cargo carried and the local rules on lifting equipment. A rear-mounted crane on a longer body is offered where the load has to be placed behind the truck, and radio remote control, air suspension and hub reduction are selected at the same stage.

Case Study

A construction contractor and equipment rental operator in the Philippines received one complete crane truck with a duty-matched configuration. The unit was installed in September 2025 with on-site assembly and commissioning; after about 14 months in service the recorded result is good performance, reliability and site adaptability, with the client reported as highly satisfied.

Crane truck unloading at a construction site after commissioning
Duty-matched crane truck in service on a contractor site.

FAQ

How high and how far does the boom reach?

13.5 m maximum lifting height and 11.5 m maximum working radius on this unit, with 3-16 m working radius available across the range.

What capacity can I plan on?

Capacity is quoted with the radius. The load chart ships with the unit and the lift is planned from the actual radius and boom length, not from the rating alone.

What cargo body is fitted?

A 5,400-5,550 x 2,294 x 600 mm drop-side body on the quoted straight-arm unit, with a 3-5 mm steel or checker plate floor, removable posts and lashing points; 3-9 m body length is available.

Which chassis do I need for a larger crane?

6x4 covers 8,000-16,000 kg cranes and 8x4 covers 16,000-25,000 kg, with GVW 18,000-31,000 kg and wheelbase 5,700-7,500 mm on those configurations.

What controls and safety devices are available?

A manual lever bank at the crane base is standard and proportional radio remote control is optional. A load moment limiter is available for the lifting circuit, with pressure relief and check valves and an alarm when an outrigger is not fully deployed.

Lead time, warranty and shipping terms?

About 30-45 working days from down payment and a 12-month warranty on major components. Units ship by RoRo or container under FOB, CIF or DAP terms with invoice, packing list, bill of lading, certificate of origin and insurance.

Inquiry Information

Share the heaviest load, the longest radius, the site access and ground, the cargo carried and the local rules on lifting equipment. Sales engineers confirm boom type, crane class, chassis, crane position and body length before the order.

Henan Elorry Industrial Co., Ltd. | Tel +86-13083602803 | WhatsApp +86-16638078903 | info@elorry-ind.com | Zhengzhou City, Henan Province, China

Image Filenames and Alt Text

  • crane-truck-telescopic-8t-4x2-boom-extended.png - Telescopic boom crane truck with the straight boom extended on a 4x2 chassis
  • crane-truck-telescopic-8t-drop-side-body.png - Crane truck drop-side cargo body with removable posts and lashing points
  • crane-truck-8t-site-unloading.png - Crane truck unloading at a construction site after commissioning

Hydraulic seal kits, hoses, filters and control valves are supplied as a spare-parts kit with the unit.