меню

Coarse S460-S930 Cast Steel Shot for Heavy Foundry Descaling

в наличии:
SKU: 3592351214
модель: Cast Steel Shot S70-S930

{{ variable.name }}

{{ value.name }}
Coarse Sizes · S460 – S930

Coarse S460-S930 Cast Steel Shot for Heavy Foundry Descaling

The coarse end of the cast steel shot range, using the heaviest particle sizes for thick scale, casting cleaning and high-impact descaling duty.

S460 – S930Heavy impactHRC 40-50 / 55-657.8 g/cm³1000+ cycles
Coarse cast steel shot in the larger S460 to S930 sizes for heavy descaling work
Coarse cast steel shot for heavy descaling and casting cleaning

1Product Summary

Cast Steel Shot is produced as a full series from S70 to S930. This page covers the coarse end of the range, S460, S550, S660, S780 and S930, where the larger particle mass delivers a heavier impact on thick mill scale, sand burn-on and heavy rust.

All sizes are made from high carbon cast steel with a spherical shape, 7.8 g/cm³ specific gravity and 4.5-4.8 g/cm³ bulk density, and are supplied in either the HRC 40-50 or the HRC 55-65 hardness grade. Coarse shot is typically run in applications where the priority is fast removal of thick contamination rather than fine surface finishing.

2Key Features

Heavier particle impact

Larger S460 to S930 particles carry more mass per hit, which speeds up removal of thick scale, rust and sand burn-on.

Spherical shape at coarse sizes

Rounded particles resist the fracture pattern of angular media and reduce wear on blast wheels and liners.

Hardness choice per duty

Coarse sizes are available at HRC 40-50 for cleaning duty or HRC 55-65 where harder impact is required.

1000+ recyclable cycles

Long service life means fewer top-ups on high-throughput foundry and shipyard lines.

Low dust generation

Lower dust reduces loading on extraction systems during continuous descaling shifts.

SAE J441 / J827 grading

Size designations match recognised SAE grading so coarse shot can be matched to existing separators.

3Technical Specifications

PropertyValue
MaterialHigh carbon cast steel
Coarse sizes in this variantS460, S550, S660, S780, S930
Full series rangeS70 to S930 (twelve sizes)
Hardness optionsHRC 40-50 or HRC 55-65
Particle shapeSpherical
Specific gravity7.8 g/cm³
Bulk density4.5-4.8 g/cm³
Recyclable cycles1000+
Grading standardSAE J441 / J827
Test report standardsJB/T8354-1996, YB/T5150-93, GB/T88.3
Quality systemISO9001

4Models and Options

The five coarse designations are highlighted below. The finer sizes of the same series are produced for work that needs a lighter impact and a smoother profile.

S70S110S170S230S280S330S390S460S550S660S780S930

Coarse grades can be customized to the customer blasting machine and separator setting.

5Materials and Structure

High carbon cast steel is melted in medium-frequency induction furnaces, granulated by centrifugal atomization, then quenched and tempered, rounded and screened. Screening produces the graded S designations, so each size band stays consistent within the batch.

Each batch is tested for chemical composition and fatigue life and inspected by pre-shipment sampling. MTC test reports are issued against JB/T8354-1996, YB/T5150-93 and GB/T88.3.

6Applications

  • Foundry casting cleaning and descaling of oxide scale after casting
  • Heavy rust and thick mill scale removal from plate and profiles
  • Ship hull and dock blasting where heavy contamination is present
  • Steel structure and bridge fabrication surface preparation before painting
  • Rail and locomotive component cleaning
  • Tumble blast machines, blast rooms and automated blasting lines
Coarse cast steel shot particles from the S460 to S930 range used for casting cleaning
Coarse spherical particles for high-impact descaling duty

7Customization

Coarse sizes can be supplied as a customized grade to suit a specific machine and separator. The plant runs on 20,000 m² with an annual capacity of approximately 100,000 tons, which supports bulk programmes for foundries and shipyards.

8Case Study

Foundries, shipbuilding and ship repair companies and structural steel fabricators are part of a five-year supply programme that spans AR, ES, FR, GB, IR, KR, MY, PK, PT, SA, TH, US and VN, with 100 tons per order and annual supply over 500 tons.

  • Applications included ship hull blasting and rust removal, foundry casting descaling and structural steel preparation
  • Sa2.5-3.0 surface preparation grade achieved with improved coating adhesion
  • Abrasive consumption reduced by 15-20% compared with the previous supplier
  • Zero quality complaints across five years of supply

9FAQ

When should coarse shot be used instead of fine shot?

Coarse S460 to S930 sizes are intended for heavy contamination and high-impact cleaning such as casting descaling and thick scale removal. The same series also includes finer sizes down to S70 when a lighter impact and smoother profile are needed.

Which hardness should be selected for descaling?

Both HRC 40-50 and HRC 55-65 are available in the coarse sizes. The choice depends on the workpiece and the impact level required by the process.

Will coarse shot wear the blast wheel faster?

The particles are spherical rather than angular, which supports a smooth surface profile and reduces wear on blast wheels according to the product characteristics.

Is the shot recyclable in the machine?

Yes. The series is rated for 1000+ recyclable cycles and is used with abrasive recovery and recycling systems.

What test documentation is supplied?

MTC test reports against JB/T8354-1996, YB/T5150-93 and GB/T88.3, plus chemical composition and fatigue life testing of each batch.

How should coarse shot be stored?

Keep it dry to prevent caking, particularly before loading into the machine hopper.

10Inquiry Information

ContactFan · Zouping Huiteng Metal Abrasives Co., Ltd.
Tel / WhatsApp+86 188-5431-6114
AddressQingyang Town Industrial Park, Zouping County, Binzhou City, Shandong Province, China

Tell us the casting or plate condition and the machine type so the coarse size band and hardness grade can be confirmed.

11Image Filenames and Alt Suggestions

  • cast-steel-shot-s460-s930-coarse-bulk.png — Alt: Coarse cast steel shot in the larger S460 to S930 sizes for heavy descaling work
  • cast-steel-shot-s460-s930-particles.jpg — Alt: Coarse cast steel shot particles from the S460 to S930 range used for casting cleaning
  • cast-steel-shot-descaling-application.jpg — Alt: Cast steel shot used on a heavy descaling application in a blasting machine