меню

Crane Truck

в наличии:
SKU: 015735766X
модель: Crane Truck

{{ variable.name }}

{{ value.name }}

Product Specification

TypeMechanical transmission Crane Truck、Hydraulic transmission Crane Truck、Lattice boom Crane Truck、Box-section telescopic boom Crane Truck、Straight-boom Crane Truck、Telescopic-boom Crane Truck、Knuckle-boom Crane Truck、Articulating-boom Crane TruckModelCrane Truck
ParamsCONFIGURATION - Product family: truck-mounted crane on a commercial chassis; a hydraulic crane behind the cab or at the rear, with a cargo body alongside it, so one vehicle transports and lifts the load - Drive configuration: 4x2 for 2,000-8,000 kg crane classes and city delivery; 6x4 for 8,000-16,000 kg; 8x4 for 16,000-25,000 kg and long cargo bodies - GVW: 12,005-16,000 kg on the quoted 4x2 units; 18,000-31,000 kg available on 6x4 and 8x4 configurations - Curb weight: 5,880-6,050 kg on the quoted 4x2 units, crane, subframe and body included - Overall dimensions: length 8,600-9,000 mm, width 2,500 mm, height 3,200-3,650 mm on the quoted 4x2 units; longer bodies on larger chassis - Wheelbase: 4,700-5,000 mm on the quoted units; 5,700-7,500 mm available on 6x4 and 8x4 - Cab: 2-3 seats, day cab standard with sleeper optional; left-hand or right-hand drive - Max speed: 90-100 km/h CRANE AND LOAD CHART - Boom families: a folding (knuckle) boom stows inside the vehicle width behind the cab and keeps the bed clear; a straight (telescopic) boom gives the higher vertical lift - Rated capacity: 2,000-25,000 kg across the range; the quoted 4x2 units are 4,000 kg folding and 8,000 kg straight - Lifting moment: 20 tonne-metres on the quoted 4,000 kg folding unit; 8-60 tonne-metres available across the range, quoted as the product of load and radius - Capacity at radius on the 20 tonne-metre unit: about 3,300 kg at 6 m and about 2,400 kg at 7.8 m, so capacity is always quoted together with the radius - Max working radius: 7.815 m on the folding unit and 11.5 m on the straight-arm unit; 3-16 m available - Max lifting height: 10 m on the folding unit and 13.5 m on the straight-arm unit - Crane self-weight: 1,500 kg on the quoted unit, deducted from chassis payload before the body is sized - Slewing: 360 degrees continuous on the larger cranes, limited arc on the light units - Boom sections: 2-5 hydraulic extensions, fly jib optional OUTRIGGERS AND CONTROLS - Outriggers: hydraulic H-type front and rear legs in box section, with full spread and partial spread quoted separately - Spread: 2.2-5.5 m lateral depending on crane class; the load chart applies only with the legs deployed as stated - Controls: manual lever bank at the crane base; proportional radio remote control optional - Safety: load moment limiter available for the lifting circuit, pressure relief and check valves, and an alarm when an outrigger is not fully deployed HYDRAULICS AND POWER TAKE-OFF - System: open-centre hydraulics driven by a power take-off from the gearbox, working pressure about 16-35 MPa - Pump flow matched to crane size; oil cooler and return filter standard; cylinders with honed tubes and hard-chrome plated piston rods, seal kits and hoses stocked as spare parts CHASSIS AND DRIVELINE - Engine: diesel, 132-180 hp (97-132 kW) on the quoted 4x2 units, 4.5-5.9 L displacement, Euro II to Euro V matched to local fuel quality - Transmission: manual 6-speed on the quoted 4x2 units, 6-10 forward speeds on 6x4 and 8x4; automated manual optional - Axles: front 6,000 kg and rear 10,000 kg on the quoted unit; hub reduction optional - Brakes: air brake with ABS, exhaust brake and spring parking brake - Tires: 9.00R20, 6 tires plus one spare on the quoted unit; 8.25R16 to 12.00R20 available - Suspension: leaf springs standard; air suspension optional CARGO BODY - Body: drop-side cargo body 5,400-5,550 x 2,294 x 600 mm on the quoted straight-arm unit; 3-9 m body length available - Floor: 3-5 mm steel plate or checker plate; side walls 600-800 mm with removable posts - Gates and layout: hinged double-wall side gates and tailgate, rope hooks and lashing points; crane behind the cab with the body behind it, or a rear-mounted crane on a longer body QUALITY AND DELIVERY - Pre-shipment check: crane load test at rated capacity, hydraulic pressure and leak test, outrigger cycle test, brake test and road test - Warranty: 12 months for major components; hydraulic valves and cylinders covered under supplier terms - Lead time: about 30-45 working days from down payment - Export documents: invoice, packing list, bill of lading, certificate of origin and insurance - Trade terms: FOB, CIF or DAP; RoRo or container shipment depending on unit height - Spare-parts kit: seal kits, hydraulic hoses, filters, control valves and rope for winch-equipped unitsMaterialCrane structure: welded high-strength steel box section, Q345 or Q460 plate for boom, column and knuckle joints, with Q345 reinforcement plates at the pivot points. Subframe: Q345 channel or box section, bolted and welded to the chassis rails. Outrigger beams and legs: high-strength steel with cast or forged feet and nylon wear sliders. Hydraulic cylinders: honed steel tubes with hard-chrome plated piston rods; nitrile and polyurethane seals. Hoses and fittings: two-wire braided rubber with crimped steel fittings. Cargo body: Q235/Q345 steel, 3-5 mm floor plate, double-wall drop sides. Deck surface: checker plate or anti-slip coating. Fasteners: galvanised bolts, stainless clamps and pins with grease nipples. Finish: anti-corrosion primer plus polyurethane topcoat. Loose gear: rubber outrigger pads and polyester webbing slings.
Applicable IndustryConstruction and building material supply. Precast concrete, steel, glass and panel handling. Utility and power line maintenance. Municipal works, street lighting and sign installation. Landscaping, nursery and tree care. Warehousing, container yards and freight depots. Ports and terminals. Oil, gas and pipeline maintenance. Mining and quarry support. Equipment rental and leasing fleets. Agriculture, feed and fertiliser supply. Disaster relief and emergency logistics. Road maintenance and guardrail work. Waste collection and recycling yards. Machinery moving, rigging and installation contractors.

Feature

1. One truck, two jobs. A crane truck carries its own load to site and unloads and places it without a second machine or a hired mobile crane, which removes the standby cost and the wait for a crane to arrive on a delivery round. 2. Two boom families on one product line. The folding (knuckle) boom stows within the vehicle width behind the cab and leaves the cargo bed clear; the straight (telescopic) boom reaches higher and lowers the load on a rope. The buyer chooses by the duty, not by the headline number. 3. Ratings are read at the radius that applies. The quoted 20 tonne-metre unit lifts about 3,300 kg at 6 m and about 2,400 kg at 7.8 m, and capacity at the shortest radius is only a brochure figure. The load chart ships with every unit and the lift is checked from the actual radius and boom length. 4. The payload budget is settled before the order. Crane weight of 1,500 kg on the quoted unit, the subframe and the cargo body all come out of the chassis payload, so GVW, rear-axle load and the remaining cargo capacity are calculated together and confirmed before the chassis is specified. 5. Outriggers sized for real sites. Box-section H-type front and rear legs with full and partial spread, each with its own capacity column. Where a kerbside, a yard wall or a narrow lane will not allow full spread, the crane is sized on the partial-spread chart instead of being pushed to its limit. 6. The cargo body is built around the crane. A 5,400-5,550 x 2,294 x 600 mm drop-side body on the quoted straight-arm unit, with removable posts, lashing points and a floor that takes pallets, bricks, steel or precast units; body length is fixed to the crane position so the boom never fouls the load. 7. Chassis matched to the crane class. 4x2 for 2-8 t cranes in city work, 6x4 for 8-16 t and 8x4 for 16-25 t; engine 132-180 hp, Euro II to Euro V, and hub reduction or air suspension where the route or the load asks for it. 8. Hydraulics chosen for service in the destination market. Open-centre system at 16-35 MPa on a gearbox power take-off, hard-chrome cylinder rods, and seal kits and hoses shipped as a spare-parts kit, so a workshop without a dealer nearby can still repair the crane. 9. Custom lifting attachments. Beyond complete trucks, crane booms and attachments can be built to the customer's mounting interface, dimensions and working conditions; a 10 tonne boom-crane attachment was tailor-made and shipped to an African client in 2025 with installation guidance and operating instructions. 10. Export handling in one set. Invoice, packing list, bill of lading, certificate of origin and insurance are prepared together, units ship by RoRo or container under FOB, CIF or DAP terms, and the hydraulic system is drained and protected for the sea passage. 11. Advice before the order. Sales engineers ask for the heaviest load, the longest radius, the site access and ground, the cargo carried and the local rules on lifting equipment, then fix boom type, crane class, chassis and body length, so the truck is not bought twice.

elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck


elorry-crane-truck

elorry-crane-truck