меню

Low-Vibration Oil-Free Centrifugal Air Compressor for Air Separation

в наличии:
SKU: 7887958830
модель: SLT300、SLT800、SLT1250、SLT1800、SLT2500、SLT3700、SLT6000、SLT8000、SLT72000

{{ variable.name }}

{{ value.name }}

Oil-Free Centrifugal Turbo Air Compressor for Air Separation

SLT series · continuous heavy-duty duty · 100% oil-free · air, nitrogen and oxygen-enriched gas

SLT oil-free centrifugal air compressor supplied for air separation duty

SLT centrifugal turbo compressor — oil-free air supply for air separation trains

Product Summary

Air separation trains need large volumes of clean, oil-free feed air, and the duty rarely stops. The SLT centrifugal turbo air compressor is configured for exactly that role: a 100% oil-free compression path, high flow across the 70–4000 m³/min series range, and discharge pressure from 2.1 to 12.5 barg depending on model. Units are built for continuous operation in industrial or outdoor environments, including high-altitude and coastal sites, where corrosion resistance matters. Final flow and pressure are fixed per model and configuration.

Key Features

Oil-free by design for ASU feed air

The compression path carries no oil, so the air delivered downstream stays oil-free — the baseline requirement for air separation and gas generation systems.

High-flow continuous supply

The series covers 70–4000 m³/min, which lets a single frame feed large separation trains without splitting the duty across several smaller machines.

3D impeller efficiency

Semi-open 3D impellers designed in NREC software, with backward-swept blades and a low-solidity airfoil diffuser, keep stage efficiency high over a wider operating range.

Rotor balance below G1

Every impeller, gearbox and rotor is precision balanced and overspeed tested before shipment, so vibration stays well below standard requirements at continuous duty.

Corrosion-resistant materials

Titanium alloys and stainless steel are used for impellers and wetted parts, which suits coastal locations and humid operating conditions.

Anti-surge intelligent control

The control system calculates minimum load limits automatically and limits maximum load under variable conditions to protect the motor from overcurrent.

Technical Specifications

Model seriesSLT300, SLT800, SLT1250, SLT1800, SLT2500, SLT3700, SLT6000, SLT8000, SLT72000
Flow rate70–4000 m³/min (series range)
Outlet pressure2.1–12.5 barg (series range)
Unit weight11.0–85.0 t (series range)
Gas mediaAir, nitrogen, oxygen-enriched gas
Delivered air100% oil-free
Impeller and wetted materialTitanium alloys, stainless steel
Rotor dynamic balanceGrade below G1
Operation modeContinuous operation in industrial or outdoor environments
Compression stageSingle-stage or multi-stage, per duty point

Models and Options

Frames run from SLT300 to SLT72000, with stage count and arrangement selected against the required flow and discharge pressure. Gas medium is fixed at ordering: air, nitrogen or oxygen-enriched gas. Small units are built as an integrated skid; large units use the split arrangement.

Materials and Structure

Impellers and wetted parts in titanium alloys or stainless steel, an in-house gearbox, and a rotor assembly balanced below G1 form the core. Because impellers and gearboxes are machined and tested in-house, quality consistency and delivery timelines stay under direct control.

Applications

Air separation unitsPSA nitrogen and oxygen generationAdsorption dryer feed airInstrument air for gas plantsHigh-altitude and coastal installations

Customization

Duty-point selection, stage count, skid or split arrangement, gas medium and wetted materials can all be specified. OEM and ODM support is available where project documentation and branding must follow a buyer template.

FAQ

Why is oil-free compression required for air separation?

Oil carry-over contaminates downstream separation and gas-generation equipment. The SLT machine uses no oil in the compression path, so the delivered air stays oil-free.

Can the compressor handle nitrogen or oxygen-enriched gas?

Yes. The SLT series handles air, nitrogen and oxygen-enriched gas. Specify the gas composition and purity target when requesting a configuration.

Is the machine suitable for coastal sites?

Titanium alloys and stainless steel are available for impellers and wetted parts, and the series is built for industrial or outdoor environments including coastal locations.

How is vibration controlled at continuous duty?

Rotor assembly dynamic balance is below G1. Every impeller, gearbox and rotor is precision balanced and overspeed tested before shipment.

What can be matched downstream?

Typical matched equipment includes nitrogen and oxygen generators, adsorption dryers and precision filters as part of an on-site gas supply system.

Which conformity documents are supplied?

An EC Declaration of Conformity for air compressors (ECM, no. 0P230209.SSE0Q23, valid to 2028-02-08) and ISO 14001 certification (NOA, no. 05126E00664R053, valid to 2029-03-26).

Inquiry Information

Email: info@sollant.com  |  Tel / WhatsApp: +86 155-8905-3798  |  Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China. Send feed-air flow, discharge pressure, gas medium and site altitude for selection.

Image Filename and Alt Suggestions

  • slt2500-oil-free-centrifugal-compressor-air-separation.png — alt: SLT oil-free centrifugal compressor installed for air separation feed air
  • slt3700-centrifugal-compressor-stainless-impeller.png — alt: Stainless steel 3D impeller of the SLT centrifugal compressor