Product Summary

The YN-HL500 is a semi-automatic bussing machine built for busbar welding on 100W-550W solar panels. Modules enter horizontally and leave horizontally, so the machine sits inside a straight production line without changing the direction of module flow. Output reaches 80-90 pieces per hour on 550W modules, with a rated hourly output of 90 pieces. High-frequency electromagnetic soldering gives rapid heating, stable performance and a neat soldering appearance, and the A-grade yield rate is above 99%. The machine covers 1-6 series strings, string lengths of 1000-2400 mm, cell widths of 125-210 mm and cell spacing of 1-10 mm, which makes it a practical choice for module makers upgrading or retrofitting an existing line.

Key Features

Technical Specifications

Models and Options

The YN-HL500 is the model specified for 100W-550W solar panels. Because module formats differ between factories, confirm the string length (1000-2400 mm), the number of series strings (1-6) and the cell width (125-210 mm) against your bill of materials before ordering. Send your module drawing, cell layout and existing line layout to YNTECH and the engineering team will review the configuration and the position of the machine in your line.

Materials and Structure

The machine is built from carbon steel, aluminum alloy and stainless steel components. The bussing head works on high-frequency electromagnetic soldering, which heats rapidly and keeps the soldering appearance neat and repeatable. Horizontal infeed and horizontal outfeed conveyors carry the module through the station in a straight line. Operators jog each individual mechanism from the operating pendant, and the equipment is available for 24/7 operation. Install the machine in a dry, well-ventilated area free of corrosive gases, and keep the operating zone clean so debris and dust do not enter the equipment.

Applications

• Solar module manufacturers running busbar welding on 100W-550W panels.
• Production line upgrades and retrofits where a bussing station is added to an existing flow.
• Manual-to-automatic transformation projects moving from hand soldering to semi-automatic bussing.
• PV cell module factories that need continuous production with reduced material loss.
• Indoor, dust-controlled workshops at ambient temperatures of -10~40 degrees C.

Customization

YNTECH supports module makers with layout design, equipment manufacturing, factory installation, commissioning, technical training and after-sales maintenance. For the YN-HL500, share your module size, cell layout and target throughput so the string configuration, machine placement and interfaces with the neighbouring stations can be reviewed together with the line capacity you are planning.

Case Study

FAQ

Inquiry Information

Image Filename and Alt Suggestions