меню

Two Stage PM VSD Air Compressor for Automotive Assembly Lines

в наличии:
SKU: 2798598311
модель: SLTT-22V、SLTT-30V、SLTT-37V、SLTT-45V、SLTT-55V、SLTT-75V、SLTT-90V、SLTT-110V、SLTT-132V、SLTT-160V、SLTT-185V、SLTT-220V、SLTT-250V

{{ variable.name }}

{{ value.name }}
Automotive Assembly Air Supply

Two Stage PM VSD Air Compressor for Automotive Assembly Lines

For automotive plants needing stable air for assembly lines and pneumatic tools, with dust and particle control and high cleanliness requirements in paint shops. This two-stage PM VSD unit serves large-scale continuous production; oil-free painting air is handled separately.

22–250 kW series8–13 barLarge-scale continuous dutyStable pressure
Two stage PM VSD air compressor for automotive assembly lines
Two-stage PM VSD air compressor for automotive assembly and utility air.

Product Summary

Automotive plants need stable air for assembly lines and pneumatic tools while controlling dust and particles. This two-stage PM VSD compressor is used in large-scale continuous production to reduce energy consumption and hold pressure. For paint shops requiring high cleanliness, the plant solution uses oil-free water-lubricated compressors; this unit serves assembly and utility air.

Key Features

Two-stage compression

Lower stage compression ratio, reduced internal leakage and bearing load, higher volumetric efficiency and longer host life.

15% more displacement

Two-stage PM VSD replaces single-stage compression and increases displacement by nearly 15%, adding up to 15% energy saving.

Large-scale continuous duty

Two-stage PM VSD significantly reduces energy consumption on large-scale, continuous automotive production lines.

Up to 40% energy saving

Compared with ordinary industrial frequency machines. At 8,000 h/year, the saving can reach about USD 30,000 per year.

Integrated shaft structure

The motor and male rotor use one shaft, eliminating coupling and gear transmission and reducing related failure risk.

Low noise and vibration

No motor, bearing, gear or coupling noise; noise range for the series is 65–78 ±3 dB.

Technical Specifications

ParameterSpecification
Model familySLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V, SLTT-250V
Working pressure8–13 bar
Capacity1.36–53.68 m³/min (series range)
Power range22–250 kW
Horsepower30–335 hp
Noise65–78 ±3 dB
Air outlet pipe diameterDN40, DN50, DN65, DN100
Net weight732–6000 kg (series range)
CompressionTwo-stage compression
DrivePermanent magnet variable frequency drive
Rotor profilePatented UV profile, refined by more than 20 procedures
MaterialsCast iron, stainless steel

Models and Options

The SLTT-V series covers 13 models from SLTT-22V to SLTT-250V, with 22–250 kW power, 8–13 bar working pressure and 1.36–53.68 m³/min capacity range. Final model selection depends on required air flow, pressure, duty cycle and site conditions.

Materials and Structure

The air end uses a patented UV rotor profile and two-stage compression structure. Cast iron and stainless steel are used in the construction. The PM VSD motor and male rotor adopt an integrated shaft structure, so there is no coupling or gear transmission. This compact arrangement reduces efficiency loss and mechanical failure points.

Low noise and low vibration are achieved by removing motor, bearing, gear and coupling noise sources. The integrated PM VSD structure also saves floor space, which matters in dense automotive assembly areas.

Applications

This two-stage PM VSD unit serves automotive manufacturing air demands where stable pressure and energy efficiency are priorities:

  • Stable power air for assembly lines and pneumatic tools.
  • Large-scale continuous production, where two-stage PM VSD significantly reduces energy consumption.
  • Integrated system with air receiver, refrigerated dryer and precision filters (C/T/A grades) to remove moisture, oil and dust and deliver clean air at the point of use.
  • Painting and coating lines require oil-free water-lubricated screw compressors to prevent oil contamination; this unit is applied to assembly and utility air.

Customization

Sollant supports OEM/ODM customization. Project requirements can be discussed around the SLTT-V model, working pressure within 8–13 bar, air outlet size, and matched air receiver, refrigerated dryer or precision filter configuration. Sollant was founded in 2004 and operates a 30,000 ㎡ facility with 20,000 units annual output.

FAQ

Q: Why use two-stage PM VSD for automotive assembly lines?

Automotive assembly lines need stable pressure for pneumatic tools and continuous production. Two-stage PM VSD reduces energy consumption on large-scale lines, increases displacement by nearly 15% and can save up to 40% versus ordinary industrial frequency machines.

Q: Is this unit suitable for painting or coating lines?

Painting and coating lines require high cleanliness and oil-free air. The automotive plant solution uses oil-free water-lubricated screw compressors for those lines. This two-stage PM VSD unit serves assembly lines, pneumatic tools and utility air.

Q: What air treatment is matched?

The automotive solution matches air receiver tanks, refrigerated dryers and precision filters (C/T/A grades) to remove moisture, oil and dust and deliver stable, clean air at the point of use.

Q: Which models are available?

The SLTT-V series includes SLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V and SLTT-250V.

Q: What certifications are available?

Sollant's related certification set includes CE for air compressors, CE for permanent magnet motors, EMC for the controller, PED verification for oil and air tanks, and ISO 14001 environmental management.

Q: Can Sollant customize and support the project after delivery?

Yes. OEM/ODM support is available, and Sollant provides 24/7 engineering after-sales support and original spare parts through its international service team.

Inquiry Information

Send your required model, working pressure, capacity, site conditions and destination country to info@sollant.com. Tel or WhatsApp: +86 155-8905-3798. Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.

Discuss Your Automotive Project

Image Filename and Alt Suggestions

  • two-stage-pm-vsd-air-compressor-automotive-assembly.png — Alt: Two stage PM VSD air compressor for automotive assembly line air supply.
  • two-stage-air-compressor-automotive-plant.png — Alt: Sollant two-stage air compressor for automotive plant utility air.
  • pm-vsd-compressor-stable-pressure.png — Alt: Two-stage PM VSD compressor unit for stable pressure production air.

SEO Title: Two Stage PM VSD Air Compressor for Automotive Assembly Lines | Sollant

Meta Description: Two-stage PM VSD air compressor for automotive assembly lines. Covers 22–250 kW, 8–13 bar, low noise, and stable air for continuous assembly production.

URL Slug: two-stage-pm-vsd-air-compressor-automotive